GARAGE DOOR SPRINGS

GARAGE DOOR SPRINGS

A garage door opener is a great thing to have as it is convenient and for security reasons it’s the best thing you can ever have.  A garage door just lets you press a simple button on your remote and you drive right inside the garage. But what if it does not work, isn’t it that frustrating and annoying? When it stops working for some reason or another, you realize its importance and how it is so difficult and not the same to get out of the car and open your garage door. Fortunately a garage door opener is easy to maintain and can be easily corrected if necessary. At times you will get to a point that your garage door problem does not respond when pressing the remote button or press the wall button. Secondly, the opener runs but does not open the door. Third, it is not open and closes the door completely. I would suggest you contact a professional installer www.autogate.co.za to have a look at this. But should you think you can do this on your own, and then here are a few pointers to bear in mind. Repairs include, testing of the engine or controls, battery replacement, and lubrication and implementation of these mechanisms. Should you discover that your garage door is not locking, the first thing to check on is your power supply. Should that be working, and then the next step would be to know what type of spring system you will require for your garage door. There are two different types, The first is the standard extension spring. This type of spring is most comfortable for the do-it-yourself “open repair” projects. Some common problems with it are broken cables, broken springs, pulleys and rollers broken. It is easy to find cables and spring break, but further examination is necessary to locate the pulleys and rollers broken. If you think the problem lays with the door tracks systems and not the garage door opener, consult your installer or us for more info.

For the sectional doors of your garage you can have two different types of door springs - either torsion based or side-mounted. If you have a torsion garage-door opener, then before you get down to adjusting or replacing the garage door opener, you must understand the basic workings of the unit. The torsion springs are placed on a fixed metal shaft which is situated just above the top of the frame for the garage door. The springs extend along the length of the shaft and they twist as the garage door shuts or opens through a means of cables which are attached to either side of the lowest garage door panel. The tension produced in the cables helps to lift the door form the closed position. Let us first be clear that adjusting a torsion spring manually can be dangerous as you will have to do this with the door shut and the spring under tension. So before you start make sure that all the tools you require are with you before you start work. This is especially true for those who do not have an alternate door for entry and exit to and from the garage.

The first thing you need to do is to secure the door by putting a C-clamp on the track of the garage door under the roller that is at the very bottom. Since you have to adjust the spring tighter, there is always the possibility to over tighten it which can be disastrous as the door may rise. The end of the spring that moves is to be attached to the adjustment collar. You would need to purchase a steel rod from your hardware store to use it as an adjustment rod. The adjustment collar comes with a series of holes and you need to insert the rod through one of these holes. When the adjusting rod has fitted in tightly to the hole then the set screw is relaxed and the rod is used to turn the collar so that the tension in the spring is either increased or decreased as per your needs.

Author Description :

Kobus Labuschagne  writes about on Tips on Adjusting or Replacing Torsion Garage Door-Openings to visit :- www.autogate.co.za