TIPS AND TRICKS ON GATES AND THEIR MOTORS
·
Did you know that many callout services is due to the gate itself
and not the motor. Reason being soil or other objects might have got into the gate railings and tracks. This causes
collision to the movement.
·
Gates that need a lot of force to
pull by hand need to be serviced as the gate wheels. And in return the metal
joints on the tracks can be worn out or rusty.
·
The gates track should be straight and
completely level, metal joint on the track should be smooth.
·
The Centurion D2 with battery backup is
recommended for small sliding gates less than 3 meters long. This one is good
for the domestic type.
·
Centurion D5Evo with battery backup is
recommended for longer and heavier gates but less than 500Kg in weight. This
one is good for small complex units or small business premises.
·
Centurion A10 is designed for complex gates and where heavy duty traffic access is required - gates
smaller than 1000Kg
·
The Centurion A10 standard gate motor comes
without battery backup and with a simple inverter it can be configured to make
use of a battery
backup.
·
The Centurion
gate motor is
o Sensitive anti-crushing for
increased safety
o Proven surge and lightning
protection
o Manual release - with
lockable access door for greater security
o Battery backup - using safe
low voltage battery driven DC motor
Fast operating speed - offers greater security and convenience with smooth acceleration and deceleration
Fast operating speed - offers greater security and convenience with smooth acceleration and deceleration
o Multiple programmable
features to suit a wide variety of application
o Light pillar relay output
for switching 220volt lights
o Safety beam input
o Holiday function via key
switch input
o Exit loop connection
o
Any component or part can be replaced if not repairable
www.autogate.co.za
www.autogate.co.za
No comments:
Post a Comment