HOW TO INSTALL A GATE MOTOR
Installation of a gate motors is similar, as they most likely the same. Of course you get many kinds of gate motor, usually it depends on the opener. The difference is optical sensor and the pressure plate. The motor varies and comes in different kits and a manual is usually enclosed for different types of opening systems
1. Basic necessity of installation of a gate motor is Clamps, Flat-head screwdriver, screwdriver and plastic cover. Install the gate motor to the gate with clamps to check a suitable installation.. The operator is the part from the gate motor installation kit in charge of physically opening and closing the gate. Find a place close to the bottom of the gate and screw the operator on the gate with screws from the installation kit and a screwdriver.
2. Connect the wiring from the gate motor with the wires from the electric terminal
- Plug in the gate motor's transformer in at the nearest power source. The transformer doesn't have to be near the motor, but it has to be weatherproof. Cover it with a plastic plug cover. Connect the transformer to the gate motor by running the wires through a shallow track in the soil.
- Test your gate motor for the gate opening. This part depends on whether you will have a pressure plate, infrared signal or a remote control. Set the pressure plate 10 to 15 feet from the gate. The pressure plate must be installed according to specific instructions in the installation kit, because it depends on the model. If you have an optical detection device, mount it about 10 feet from the gate, on a recommended height. Make sure to secure the device in place and protect it from atmospheric conditions. Now test your gate motor with your remote.
Should you require further advise to installation or need our professional assistance please do contact us. www.autogates.co.za
Have a comment or question (not answered above) on my products?
Email me at:
mailto:24@mailzone.co.za ?subject=Garage Door Repair =My comment or question is:
www.autogates.co.za
AUTHOR: KOBUS LABUSCHAGNE
No comments:
Post a Comment